Table of Contents
Advertisement
HDbaseT control function table
Control
Function
Side
Front-IR
(Wireless)
Rear-IR
(Wireless)
RS-232
RJ45/LAN
Wired Remote
HDBT-IR
(Wireless)
RS-232
RJ45/LAN
Wired Remote
O: Enable
X: Disable
Baud Rate
•
Press ◄/► to select RS-232 baud rate. The options are 2400, 4800, 9600, 14400, 19200,
38400, 57600 and 1152000.
•
Test Pattern
Press ◄/► to select the test pattern. The options are Off, Grid, White, Red, Green, Blue,
Black, RGB Ramps, Color Bar, Step Bars, CheckBoard, Horizental Lines, Vertical Lines,
Diagonal Lines, Horizontal Ramp and Vertical Ramps.
Projector ID Setting
•
Press ◄/► to enable or disable the projector ID.
•
Closed Caption
Press ENTER to enter the Closed Caption menu. See
for more details.
12V Trigger
•
Press ◄/► to enable or disable 12V trigger function.
•
Standby Settings
Press ENTER to enter the Standby Settings menu. See
page 59
for more details.
Network Settings
•
Press ENTER to enter the Network Settings menu. See
page 60
for more details.
•
Reset All Settings
Press ENTER to reset all settings to default value.
56
Standby Mode
Eco
Network
(< 0.5W)
(<2W)
O
O
O
O
O
O
X
O
O
O
X
X
X
X
X
X
X
X
Remark
Normal
(>2W)
O (Can disable
by OSD)
O (Can disable
by OSD)
X
X
O
O
O
O
User can connect wired
O
remote at HDBaseT TX side
to get the wired function.
"Closed Caption menu" on page 59
"Standby Settings menu" on
"Network Settings menu" on
Advertisement
Table of Contents
