Table of Contents
Advertisement
3. Press ▲/▼/◄/► to select one of the four corners and press ENTER.
4. Press ▲/▼ to adjust vertical values from 0 to 60.
5. Press ◄/► to adjust horizontal values from 0 to 60.
Auto adjusting the image
In some cases, you may need to optimize the picture quality. To do this, press AUTO on the
projector or remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function
will re-adjust the values of Frequency and Clock to provide the best picture quality.
The current source information will be displayed in the upper left corner of the screen for 3
seconds.
Note:
•
The screen will be blank while AUTO is functioning.
•
This function is only available when PC signal (analog RGB) is selected.
38
Advertisement
Table of Contents
