3D Color Management Menu - BenQ LU9255 User Manual

3D Color Management menu

• Primary Color
Press ENTER to enter the Primary Color menu. Press ▲/▼ to select the primary color.
The options are R, G, B, C, M, Y, and W.
When Primary Color select R, G, B, C, Y and M, Adjusting Hue, Saturation and Gain.
Hue
•
Press ENTER to enter the Hue menu. Press ▲/▼/◄/► to adjust settings.
• Saturation
Press ENTER to enter the Saturation menu. Press ▲/▼/◄/► to adjust settings.
Gain
•
Press ENTER to enter the Gain menu. Press ▲/▼/◄/► to adjust settings.
When Primary color Select White, Adjusting Red Gain/Green Gain/Blue Gain.
3D Color Management
In most installation situations, color management will not be necessary, such as in classroom,
meeting room, or lounge room situations where lights remain on, or where building external
windows allow daylight into the room.
Only in permanent installations with controlled lighting levels such as boardrooms, lecture
theaters, or home theaters, should color management be considered. Color management
provides fine color control adjustment to allow for more accurate color reproduction, should
you require it.
Proper color management can only be achieved under controlled and reproducible viewing
conditions. You will need to use a colorimeter (color light meter), and provide a set of
suitable source images to measure color reproduction. These tools are not provided with
the projector, however, your projector supplier should be able to provide you with suitable
guidance, or even an experienced professional installer.
The Color Management provides seven sets (RGBCMYW) of colors to be adjusted. When
you select each color, you can independently adjust its range and saturation according to your
preference.
If you have purchased a test disc which contains various color test patterns and can be used to
49