Installation Requirements - Amana NTC3500FW0 Use And Care Manual

Installation Requirements

Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Portable Installation
Parts supplied:
Flat washers for faucet
adapter and fill hoses
Faucet adapter
Hose bracket
Tools needed for installation:
Pliers that open
⁄
to 1 9 " (3.95 cm)
16
Flashlight (optional)
Silver, double-wire hose
clamp (for bottom of
drain hose)
Fill-and-drain hose
Utility knife
Permanent Installation
Parts needed (not provided with washer):
Inlet hoses with flat washers
Parts supplied:
Drain hose with clamp
Leveling feet (4)
Tools needed for installation
Pliers that open
⁄
9
to 1 " (3.95 cm)
16
Flashlight (optional)
Measuring tape
Level
NOTE: Replace inlet hoses
after 5 years of use to reduce
the risk of hose failure.
Record hose installation or
replacement dates for future
reference.
Cable tie
Utility knife
Adjustable or open-end
⁄
9 " (14 mm)
wrench
16
Phillips screwdriver
3