Related Manuals for Greenlee TC1S
Summary of Contents for Greenlee TC1S
- Page 1 INSTRUCTION MANUAL TC1S Test Unit Kit Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 99944499 REV 7 © 2006 Greenlee Textron Inc. 10/06...
-
Page 2: Table Of Contents
Operation ... 6 Maintenance ... 6 Greenlee / A Textron Company Description The Greenlee TC1S Test Unit Kit is a hand-held testing device intended to measure the crimping force produced by 1.5-ton, 4-ton, 5-ton, 6-ton, and 12-ton Greenlee hydraulic crimping tools. -
Page 3: Important Safety Information
Failure to under- stand how to safely operate this tool could result in an accident causing serious injury or death. Greenlee / A Textron Company TC1S Test Unit Kit Wear eye protection when operating this tool. Failure to wear eye protection could result in serious eye injury from flying debris. - Page 4 Failure to observe this warning could result in severe injury from harmful fumes or burns from flying debris. Greenlee / A Textron Company TC1S Test Unit Kit Use accessories that are appropriate for the applica- tion.
-
Page 5: Setup
(used with TF70) 52024054 MA12ID Adapter for 12ID indenter-type tools (used with TF130) Charging Instructions 1. Charge the TC1S for 14 to 16 hours before using the tool for the first time. 2. Use only the TCC115S adapter/charger for the TC1S. -
Page 6: Operation
Note: The ECCX tools require a UA22 die adapter. 3. Turn on the TC1S Digital Indicator. 4. Press F to set the TC1S to measure force. 5. Press Clear to remove the last stored peak force. 6. Cycle the Greenlee tool.