Maintenance; Battery Replacement - Greenlee GT-65e Instruction Manual

Voltage and continuity testers
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Maintenance

Electric shock hazard:
• Do not disassemble or attempt to repair this unit. It contains no user-
serviceable parts.
• Do not expose the unit to extremes in temperature or high humidity.
Refer to "Specifications."
Failure to observe these precautions may result in injury and can damage
the unit.

Battery Replacement

Electric shock hazard:
• Do not operate with the case or battery cover open.
• Before opening the case or battery cover, remove the test leads from
the circuit and shut off the unit.
Failure to observe these warnings could result in severe injury or death.
1.
Disconnect the unit from the circuit.
2.
Remove the two screws from the battery cover.
3.
Remove the battery cover.
4.
Replace the batteries (observe polarity).
5.
Replace the cover and screws.
Cleaning
Periodically wipe the case with a damp cloth and mild detergent; do not use
abrasives or solvents.
Greenlee Textron Inc. warrants to the original purchaser of these goods
for use that these products will be free from defects in workmanship and
material for their useful life, excepting normal wear and abuse. This
warranty is subject to the same terms and conditions contained in
Greenlee Textron Inc.'s standard one-year limited warranty.
16
Lifetime Limited Warranty

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gt-95e

Table of Contents