Greenlee GT-65e Instruction Manual page 10

Operation (cont'd)
Test Table
To test/verify
this value:
Continuity
AC voltage
DC voltage
RCD
(GT-95e only)
* GT-95e also displays voltage on LCD.
LED Table
LED Illuminated
LED 1
LED 2
LED 3
LED 4 only
Other voltage LEDs
10
Connect the
red lead to:
Component
or circuit
under test
Component
or circuit
under test
Component
or circuit
under test
Hot or live
conductor
LED 1
LED 2
LED 4
Indication
Positive (+) DC of 4.5 V or more
Negative (–) DC of 4.5 V or more
AC of 8 V or more
Continuity present
Approximate voltage level
Connect the
black lead to:
Component
or circuit
under test
Component
or circuit
under test
Component
or circuit
under test
Earth
ground
LED 3
The tester
will indicate:
Tone for resistance
of 0 to 50 kΩ
(approximately)
Voltage of 8 V
or greater*
Voltage of 4.5 V
or greater,
plus polarity*
Refer to "Typical
Measurements"
for complete
testing instructions.