Operation - Greenlee GATOR EK410 Instruction Manual

Operation

Electric shock hazard:
This tool is not insulated. When
using this unit near energized
electrical lines, use proper personal
protective equipment.
Failure to observe this warning could
result in severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from
flying debris or hydraulic oil.
Pinch points:
Keep hands away from the crimping
head when crimping.
Failure to observe this warning could
result in severe injury or death.
Greenlee / A Textron Company
EK410 Battery-powered Crimping Tool
• Do not operate the tool without dies. Damage to
the ram or crimping head can result.
• Do not operate with the crimping head open.
Damage to the ram or seals can result.
• This tool is not designed for continuous use.
After 100 crimping cycles, allow the crimping
tool to cool for 15 minutes.
• Do not place the tool in a vise. The crimping tool
is designed for hand-held operation.
• This tool may be used in damp or wet environ-
ments; however, we recommend air-drying the
tool before use if it becomes soaked.
• Use this tool for the manufacturer's intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
6
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070