Table of Contents
Advertisement
IMPORTANT SAFETY INFORMATION
Pinch points:
Keep hands away from the crimping
head when crimping.
Failure to observe this warning could
result in severe injury or death.
Do not dispose of batteries in a fire. They will vent
fumes and may explode.
Failure to observe this warning could result in severe
injury from harmful fumes or burns from flying debris.
Inspect tool and dies before use. Replace any
worn or damaged parts. A damaged or improp-
erly assembled tool can break and strike nearby
personnel.
Failure to observe this warning could result in severe
injury or death.
•
Do not operate the tool without dies. Damage to
the ram or crimping head can result.
•
Do not operate with the crimping head open.
Damage to the ram or seals can result.
•
This tool is not designed for continuous use. After
100 crimping cycles, allow the crimping tool to
cool for 15 minutes.
•
Do not place the tool in a vise. The crimping tool is
designed for hand-held operation.
•
This tool may be used in damp or wet environ-
ments; however, we recommend air-drying the tool
before use if it becomes soaked.
•
Use this tool for the manufacturer's intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
Greenlee / A Textron Company
EK210 Battery-powered Crimping Tool
Do not allow anything to contact the battery
terminals.
•
Do not immerse the batteries in liquid. Liquid may
create a short circuit and damage the battery.
If batteries are immersed, contact your service
center for proper handling.
•
Do not place the battery into a pocket, tool pouch,
or tool box with conductive objects. Conductive
objects may create a short circuit and damage the
battery.
•
Do not place a battery on moist ground or grass.
Moisture may create a short circuit and damage
the battery.
Failure to observe these precautions may result in
injury or property damage.
•
Do not store the battery at more than 60 °C
(140 °F). Damage to the battery can result.
•
Do not use another manufacturer's charger. Other
manufacturers' chargers may overcharge and
damage the battery.
•
Do not attempt to open the battery. It contains no
user-serviceable parts.
Failure to observe these precautions may result in
injury or property damage.
Do not perform any service or maintenance other
than as described in this manual. Injury or damage to
the tool may result.
Failure to observe this precaution may result in injury
and property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Advertisement
Table of Contents
