Fluke TiX660 User Manual page 40

TiX620, TiX640, TiX660, TiX1000
Users Manual
The function of the save button  when saving images is
defined in the Saving Format Submenu (see Chapter 3,
Menus).
The save button  can be used in order to immediately
accept inputs in many menus. This function shortens the
navigation and is activated by the factory, but can also be
deactivated (see Chapter 3, Menus).
The multi-function joystick
and to select functions, to input using the arrow buttons ↑,
↓, ←, →, as well as the function
center).
The focus rocker switch  can be used in order to
manually focus the infrared image:
←
change the focus to longer distance  push left
→
change the focus to shorter distance  push right
or to focus automatically:
 center function of the focus rocker switch.
2-4

can be used to navigate

(Enter, push the
The Power button is used to turn on the thermal

imager. Initially, the status LED on the left-hand side
above the  button will start to flash green and the logo
of the camera manufacturer is displayed on the camera
display. Upon successful system initialization, the status
LED will be illuminated permanently green: the thermal
imager is now ready to operate. The system start takes
about 30 seconds.
Use the power button to turn off the thermal imager.

hvh066.jpg