Appendix C Setting Up Tcp/Ip; For Windows 98/Me - Belkin F5D76314 User Manual

54Mbps 802.11g Wireless LAN Card

Appendix C Setting Up TCP/IP

This section contains instructions for configuring the TCP/IP protocol of the Wireless LAN Card. The IP address policy depends on your wireless
network. You should configure your TCP/IP protocol as instructed by your network administrator.

For Windows 98/ME

1.
2.
3.
4.
44
Double-click the Network icon on the Control Panel.
Click the Configuration tab of the Network dialog box.
In the network components list, select the TCP/IP protocol of your Wireless LAN Card, e.g., TCP/IP ->Broadcom 802.11g Network Adapter
and then click Properties.
On the IP Address tab, choose one of the methods as required:
Option A: Click Specify an IP address.
In the IP Address box, enter a valid four-component IP address, either a public or private one as required.
In the Subnet Mask box, enter a valid four-component IP address.
Then select the Gateway tab and enter your gateway information.
Option B: Select Obtain an IP address automatically.