Wireless Networks Tab; Connecting To An Existing Wireless Network - Belkin F5D76314 User Manual

54Mbps 802.11g Wireless LAN Card

Wireless Networks Tab

Wireless Networks tab allows to do the following task:
See the appropriate subsection according to your need.

Connecting to an Existing Wireless Network

To connect to an existing Access Point/Wireless LAN Card, take the following steps:
1.
2.
3.
4.
12
•
Connecting to an Existing Wireless Network
•
Configuring a New Wireless Network Connection
•
Specifying a Network Type to Access
Double-click the Broadcom Wireless Utility icon on the system tray.
When the Connect to Wireless Network window pops up, you will see all the wireless networks available in the air. Under Available networks,
select the wireless network you want to connect to.
If the target wireless network has been set with WEP key, you must enter the same WEP key in the Network key field. Otherwise, this field is
dimmed and you do not need to set up the WEP key.
Click Connect, then you will join the target network and this dialog window will disappear. When your wireless connection is established, the
connection icon may appear as below: