Table of Contents
Advertisement
Screen Item
Description
AP's MAC Address
The MAC address of the associated AP.
Channel
The channel your wireless station is using.
WEP
Displays whether WEP is disabled or enabled in the current
wireless network.
Speed
Displays the current packet transmit rate (Mbps).
Channel
Displays the channel the station is using.
Client IP Address
Displays the IP address of your wireless adapter.
Network Connection Type
Displays if the adapter is connected to an Access Point or Ad
Hoc network.
Radio State
Displays whether the RF Signal is enabled or disabled.
Signal
Displays the signal strength (dBm). On the right side, signal
strength is indicated by graphic.
Noise
Displays the noise level (dBm). Noise Level reflects the level
of radio interference as measured at the Wireless LAN Card.
Chapter 3
17
Advertisement
Table of Contents
