Table of Contents
Advertisement
54Mbps 802.11g Wireless LAN Card
3.
Your newly configured network will be added under Preferred networks. Your wireless adapter will attempt to connect preferred networks in the
order in which they appear in the list. You can change the order of preferred network by selecting the network that you want to move and clicking the
Move up or Move down button.
Note that in the Preferred networks list, an Ad-hoc network can not be moved to a higher position than an Infrastructure network. If you want to
connect to Ad Hoc network only, see "Specifying a Network Type to Access" for instructions.
14
When entering the key, the Key format and Key length are changed automatically according to the format and length of the characters you
entered. When using Hexadecimal format, only digits 0-9 and letters a-f, A-F are allowed. Make sure to enter the character matching the required
key format and length as below:
ASCII characters
40 bit
5 alphanumeric characters
104 bit
13 alphanumeric characters
Key index (advanced): Specifies the key index value. You can specify up to four keys (the key index are 0, 1, 2 and 3).
Note: Contact your network administrator if you are unsure about the WEP setting.
Ad Hoc/ Infrastructure Network: If the network you are configuring is an Ad Hoc network, check This is a computer-to-computer (ad hoc)
network... check box. Otherwise leave it unchecked for Infrastructure network connection.
After entering required fields, click OK to exit this window.
Hexadecimal digits
10 hexadecimal digits
26 hexadecimal digits
Advertisement
Table of Contents
