Using The Computer - LG N194WAT Owner's Manual

Connecting the Display

Using the Computer

1.
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
A
Connect D-sub(RGB Analog) Cable (PC)
B
Connect D-sub(RGB Analog) Cable (Mac)
Wall-outlet type
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
D-SUB cable and LAN cable when connected together, D-SUB cable to connect the first and, LAN cables, and other
input To connect a cable.
2.
Press
power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically.
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals.
'AUTO/SET' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve
resolution.
button on the front switch panel to turn the
Mac adapter
(This item must be purchased separately.)
For Apple Macintosh use, a separate plug adapter is
needed to change the 15 pin high density (3 row) D-sub
VGA connector on the supplied cable to a 15 pin 2 row
connector.
8 8
Analog signal