Table of Contents
Advertisement
Control Panel Functions
SOURCE
VOLUME
AUTO/SET
Button
Power Button
Power Indicator
(
)
Use these buttons to select or adjust functions in the
On Screen Display.
Use this button to make either D-Sub or LAN
connector active. This feature is used when two
input sources are connected to the display.
Use these buttons to select or adjust functions in the On
(
)
Screen Display.
Use
volume on LAN input.
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD).
• D-sub : Use this button to turn the display on or off.
• LAN
Monitor OFF: Power button, then press the power off
Client OFF: Power button, then click the AUTO / SET
ON : Use this button to turn the display on.
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to flicker.
buttons to decrease or increase the speaker
once more.
button to turn off the power of all the features.
12 12
Advertisement
Table of Contents
