Using The Computer - LG N1742H User Manual

Connecting the Display

Using the Computer

NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
1.
A
Connect D-sub(
B
Connect D-sub(
Wall-outlet type
2.
Press
power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically.
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals.
'AUTO/SET' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve
resolution.
RGB Analog
) Cable (PC)
RGB Analog
) Cable (Mac)
Mac adapter
For Apple Macintosh use, a separate plug adapter is
needed to change the 15 pin high density (3 row) D-sub
VGA connector on the supplied cable to a 15 pin 2 row
connector.
button on the front switch panel to turn the
X-PORT
A
B
(This item must be purchased separately.)
A7
Analog signal
D-sub