Download Print this page

Handling Docomo Mini Uim Card; Handling Near Electronic Medical Equipment; Material List - Sharp Aquos Phone Ex Instruction Manual

For docomo

Advertisement

When plugging/unplugging an adapter into/from
the handset, plug/unplug the adapter horizontally
and straightly, not applying excessive force on it.
May cause fires, burns, bodily injury or electric shock.
Unplug the power plug from the outlet or cigarette
lighter socket when not using for a long time.
May cause fires, burns or electric shock.
Should water or other liquids enter the equipment,
remove the power plug from the outlet or cigarette
lighter socket immediately.
May cause fires, burns or electric shock.
Always unplug the power plug from the outlet or
cigarette lighter socket before cleaning the
equipment.
May cause fires, burns or electric shock.

Handling docomo mini UIM card

Be careful with the cutting surface when removing
the docomo mini UIM card.
May cause bodily injury.

Handling near electronic medical equipment

If you have electronic medical equipment such as
an implanted cardiac pacemaker or an implanted
cardioverter-defibrillator, always carry or use your
handset at least 15 cm away from your implant.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
Patients receiving medical treatment away from a
hospital or medical facility (e.g. home treatment)
who are using electronic medical equipment other
than implanted cardiac pacemakers or implanted
cardioverter-defibrillators should consult the
respective manufacturers for information regarding
the effects of signals on the equipment.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
If there is any chance that the distance between the
handset and a person closest to you may get
shorter than 15 cm such as when you cannot freely
move around, set the handset not to emit radio
wave in advance (by setting Airplane mode, turning
the power off, etc.).
Somebody nearby may be equipped with electronic medical
equipment such as an implanted cardiac pacemaker or an
implanted cardioverter-defibrillator. Electromagnetic signals
may have harmful effects on the operation of the electronic
medical equipment.
Follow the instructions given by the respective
medical facilities regarding the use of the handset
on their premises.
Caution
Warning

Material list

Handset
Part
Display side
Lower part of display side
Surrounding area of display side
Surrounding area of earphone/
microphone terminal
Power key
Side key
Camera panel
Mobile light
docomo mini UIM card slot
microSD Card slot
docomo mini UIM card/microSD
Card slot cover
Gasket of docomo mini UIM card/
microSD Card slot cover
Back of display side
Speaker mesh
Surrounding area of speaker
mesh
Waterproof sheet for cabinet
Screw
External connector terminal
Surrounding area of external
connector terminal
Mouthpiece/Microphone cushion
Back cover
Part
Back cover
Handling precautions
General notes
SH-02F is waterproof, however, do not allow water to get
inside the handset and do not allow accessories or optional
parts to get wet.
The adapter and docomo mini UIM card are not waterproof. Do not
use in humid or steamy areas such as bathrooms and avoid exposing
to rain and other forms of moisture. If they are carried close to the
skin, perspiration may cause internal components to corrode and
result in malfunction. Note that if a problem is found to be due to
moisture, the handset and parts are not covered by warranty and in
some cases may be irreparable. Even when repairs are possible,
repair charges will be incurred, since the damage is not covered by
warranty.
7
Material/Surface treatment
Reinforced glass/Shatterproof
sheet of surface
PC resin/UV coating for
surface
PA resin/UV coating for
surface
PA resin/UV coating for
surface
PC resin/UV coating for
surface, Discontinuous
deposition
Aluminum/Anodizing
Acrylic resin/Printing on the
back
PC resin
SUS/Ni plating
SUS/Ni plating
PC resin
Silicon rubber
PA resin/UV coating for
surface
PET/Silk print on the back
++ボラーラ
PET/Silk print on the back
Steel/Black Ni plating, Ni
plating
SUS/Sn plating, Copper alloy/
Gold plating
PA resin/UV coating for
surface
PORON
Material/Surface treatment
PC resin/UV coating for
surface
Contents/Precautions

Advertisement

loading

This manual is also suitable for:

Sh-02f