Before Using The Handset; Part Names And Functions; Docomo Nano Uim Card - Sharp Docomo AQUOS Ever SH-04G Instruction Manual

Before Using the Handset

Part names and functions

1 External connector terminal
2 Display/Touch panel
3 Incoming/Charging lamp
4 Earpiece
5 Proximity sensor/Brightness sensor
The proximity sensor detects the distance to the face and
prevents inadvertent operation of touch panel during a call.
The brightness sensor detects the brightness of the
surrounding area and adjusts the brightness of the backlight.
6 Infrared port
7 Front camera
8 docomo nano UIM card slot
The tray for inserting the docomo nano UIM card is stowed.
9 microSD Card slot
a Earphone/Microphone terminal
b Mobile light
c H: Power key
Use to turn the power on/off, etc.
Use to turn the display on/off.
*1
13
d x/y: Volume UP/DOWN key
Adjusts the volume in each function.
e Strap hole
f docomo nano UIM card/microSD Card slot cover
g Air vent
A vent to remove excess air from the handset.
h Back camera
i Speaker
Ringtone, music, etc. can be heard from here.
The other party's voice can be heard from here during a
hands-free call.
j a mark
IC card is contained (It cannot be removed).
k FOMA/Xi antenna *2
l Mouthpiece/Microphone
m GPS/Wi-Fi/Bluetooth antenna
n FOMA/Xi sub antenna *2
*1 Do not cover the sensor area with your hand or paste a sticker
etc. on the sensor area. The sensor may not work properly.
*2 The antenna is built into the main body. Covering the antenna
area with your hand may influence the quality.
Earphone/Microphone terminal
For details on the corresponding earphone/microphone, refer to
the following website.
( h ttp://k-tai.sharp.co.jp/support/d/sh04g/peripherals.html#!/
earphone_support) (in Japanese only)

docomo nano UIM card

A docomo nano UIM card is an IC card that records personal
information, such as your phone number.
You cannot use functions such as the phone or packet
communication without inserting a docomo nano UIM card.
In Japan, you cannot call to the emergency number (110, 119 or
118) without inserting a docomo nano UIM card.
A docomo nano UIM card has a security code called PIN code
(nP. 65 "PIN code").
The handset supports only docomo nano UIM card. If you have a
docomo mini UIM card, UIM or FOMA card, bring it to a docomo
Shop to replace.
Before inserting or removing the docomo nano UIM card, turn off
the power. Hold the handset securely with your hand.
*2
Before Using the Handset