Table of Contents
Advertisement
TABLE STAND
The clock
can be placed on a table using the table
stand.
KEY FEATURES - NIGHTLIGHT WITH
MOTION SENSOR
FRONT VIEW
1
2
3
4
5
1. Rotary Motion Sensor
Detects motion and activates the nightlight and
clock backlight in accordance with the
settings used.
Twist the knob to direct the sensor to the position
you want.
2. Light Sensor
Detects the light intensity of the environment.
3. Light ON
Press to turn the clock backlight ON for 10
seconds remotely.
4. Power - ON / OFF
Slide to the appropriate setting to turn the battery
or AC power ON or OFF.
5. 4.5V Adaptor Socket
6. Light Panel
When activated the panel will light up.
7. LED Indicator
JMR868A_EN_R5
BACK VIEW
1
2
3
4
5
1. Wall Mount Hole
2. Battery Compartment
3. Channel 1 / 2
6
4. Code switch
5. Mode - On / Off / Auto
7
6. Clock Control - On / Off
7. + Light - Rotary knob
8. Reset button
3
3
Uses 3 x UM-3 / AA 1.5V batteries.
Slide to select either Channel 1 or Channel 2.
Slide to change the Code.
Slide switch to ON - the nightlight will turn on in
a dark room.
Slide switch to OFF - the nightlight is turned off.
Slide switch to AUTO - the nightlight will only be
activated by motion in a dark room.
Slide switch to ON - when motion is detected,
the clock backlight will be activated.
Slide switch to OFF - the clock backlight will not
be activated by the motion sensor.
Rotate to adjust the sensitivity of the light sensor.
Press to reset the nightlight.
09/17/2004, 14:52
6
7
8
Advertisement
Table of Contents
