Table of Contents
Advertisement
AF-S80CX
CAUTION: DISCONNECT THE ROOM AIR CONDITIONER FROM THE POWER SUPPLY BEFORE ANY SERVICE
1. Unscrew the 2 screws holding the front panel on each
side.
2. Remove the front panel by pulling the front panel at the
lower corner toward you about one inch.
Next lift up and pull it toward you.
3. Unscrew the 8 screws holding the cabinet.
2 screws are on each side.
4 screws are on back side.
2 screws are on top side.
And remove the cabinet.
4. Remove the thermistor holder.
DISASSEMBLING PROCEDURE
5. Remove the control panel.
6. Take off the fan motor connector.
7. Unscrew the 5 screws.
8. Cut the wire fixing band, slide the control box rightward
16
3 screws are holding the control box at the top and
right side.
1 screw is holding the power supply cord.
1 screw each screw on the evaporator.
and remove.
Advertisement
Table of Contents
