Sharp AF-S80CX Service Manual page 10

AF-S80CX
OFF TIMER OPERATION
• This unit has a built-in timer that can be programmed to shut the unit off up to 12 hours in advance.
You can set the timer to stop in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance
of the stop time, or in 1 hour increments from 10 to 12 hours in advance of the stop time.
• The unit will stop automatically according to your setting.
COOL / FAN TEMP
SELECTOR
TIMER ON/OFF pad
TIMER indicator
(If you wish to stop the operation
10 hours later, set the delay time
as shown above.)
1
F
hr
Previous setting
TIMER ENERGY
POWER
ON/OFF SAVER
ON/OFF
TO CANCEL THE TIMER SETTING
Touch the TIMER ON/OFF pad again after the
timer is set or, press the TIMER ON/OFF pad until
CL(cancel) appears on the display.
When the unit is operating
Touch the TIMER ON/OFF pad to set
the delayed stop time.
• The time setting will change as you touch the
pad. The display will change as follows;
Preset(0.5h)
0.5h
CL(cancel)
• The timer will be set, 5 seconds after the
TIMER ON/OFF pad is touched for the last
time.
• TIMER indicator will light.
• The time display will count down the
remaining time.
• The unit will stop when the set time expires.
All indicators and displays will go out.
10
1.0h 1.5h 10h
12h 11h