Panasonic KX-TSC909CID Operating Instructions Manual page 56

Listening to Messages
During playback
To adjust the
speaker volume
To slow down the
playback speed
(Slow Talk message
playback)
To repeat a message
To skip a message
To stop playback
For Caller ID service users (p. 28)
During playback, the display shows the name and/or number of the caller whose
message is being played.
To call back the displayed number:
Base unit: Lift the handset off the cradle or press [DIGITAL SP-PHONE] while
the number is displayed.
Cordless handset: Press the soft key (
• The unit stops playback and dials the phone number.
• If you need to edit the phone number to call back, see page 30.
• After listening to new incoming messages, "√" will be added to the call entries
in the base unit Caller List, but those of the handset Caller List will still remain
NEW (p. 29).
56
Base Unit Handset
To increase, press [ ]. To decrease, press [ ].
• You can also adjust the receiver volume on the
cordless handset.
Base unit: Press the MAILBOX button ([MAILBOX 1],
[MAILBOX 2] or [MAILBOX 3]) of the message that is
being played.
Cordless handset: Press [3].
• To return to normal speed, press the MAILBOX button
on the base unit or [3] on the cordless handset.
• Each time you press the button during playback, the
speed will change to slow/normal.
• The playback speed will return to normal after you
finish listening to messages.
Base unit: Press [ ].
Cordless handset: Press [ ] or [1].
• If you press within 5 seconds of playback, the previous
message will be played.
Base unit: Press [ ].
Cordless handset: Press [ ] or [2].
Base unit: Press [STOP].
• To resume playback, press the MAILBOX button
([MAILBOX 1], [MAILBOX 2] or [MAILBOX 3]) of the
message that is being played.
• If you do not press any button for 60 seconds or if you
press [STOP] again, the playback mode will be canceled.
Cordless handset: Press [9].
• If you do not press any button within 15 seconds, the
voice menu will start (p. 55).
DIAL
) while the number is displayed.