i
Enter a line feed.
*
Appears before fixing character and fixes the
character.
* In some screens,
(Done)", "
(Go)", etc. appear.
実行
j
Return to keypad/QWERTY.
❖ Information
To return to the display before conversion after the
・
conversion is fixed, tap
(associative) candidate (except in handwriting input
mode) etc.
To enlarge the display area, tap
・
list. To display the software keyboard, tap
(Close)].
る
For Handwriting input, tap an icon at the upper left
・
of entered character to display candidates for the
entered character. Recognized character is displayed
in light blue and characters are displayed at the
bottom of candidate list in different colors by type.
For Handwriting input, the following operations are
・
available.
- When entering 2 or more characters and tapping
the icon at the upper left,
combine entered 2 characters to 1 character.
- When entering characters, tap
entered characters.
Note the following when you use Handwriting input.
・
- For voiced sound and semi voiced sound mark,
enter in the right upper part of the input screen.
- For punctuation mark and lower case, enter in the
lower part from the center of the input screen.
, "
(Next)", "
次へ
完了
displayed in
つながり予測
in the candidate
or [
閉じ
appears. Tap
to
to delete
Flick input
Flick up/down/left/right to enter characters
in each column of kana syllabary.
Ex: Entering characters in "
You can enter "
" only by tapping. Flick left
な
for "
", up for "
", right for "
に
ぬ
for "
".
の
Multi-tap input
Tap the same key continuously to enter the
assigned character.
To enter a character assigned to the same
key, wait for changing color of tapped key to
the original (approx. 1 second), then enter
the next character (for entering the next
character soon, tap
With the key in the original color, tap
enter the last entered character again.
Ex: Entering "
"
あお
Tap "
" once
あ
1
1 second (until the key color
returns to the original).
Before Using the Terminal
" column
な
" and down
ね
to move the cursor).
u
Wait approximately
to
68