Charging with desktop holder
When using supplied Desktop Holder SO26
and AC Adapter 05 (optional) for charging, do
the following procedures.
Be sure to mount the supplied attachment
・
(Attachment 53A/53B) on the desktop holder
when charging the battery (P.36). The terminal
cannot be charged on the desktop holder
without attachment.
Notification
LED
Desktop holder
Charging jack
microUSB plug
Insert a microUSB plug of the AC
1
adapter into the charging jack on
the back side of the desktop
holder with the engraved side (B)
facing up ( ).
Unfold the power plug of the AC
2
adapter and insert it into an outlet.
AC adapter
Install the terminal to the desktop
3
holder and move it left or right
until it clicks.
When the terminal and the desktop
・
holder are correctly connected, the
notification LED of the terminal turns
on (P.45).
When charging is complete,
4
holding the desktop holder, lift the
terminal up to remove.
Remove the power plug of the AC
5
adapter from the power outlet.
Remove the microUSB plug of the
6
AC adapter from the desktop
holder.
Before Using the Terminal
35