Cannot call (Even when moving,
not disappear, or although radio waves
are enough, making/receiving calls is
unavailable.)
Turn the power OFF and ON, or remove
・
and attach docomo nano UIM card.
P.32, P.39
Due to the nature of radio waves, making/
・
receiving calls may be unavailable even
when "not out of service area" or "
appears on the display for the radio wave
condition". Move to the other place and
call again.
Check if you set call rejection.
・
Due to the crossing of radio waves, at the
・
crowded public places, calls/mails are
crossed and the connection status may
not be good. Move to other place or call
again at other time.
An application activates when dialing
If you dial to a phone number subject to
・
(Mobile select),
モバイルセレクト
(Mobile select) application
セレクト
activates. Follow the onscreen
instructions.
does
Display
■
The display is dim.
・
・
→
・
・
・
・
P.87, P.88
→
Sound
■
During a voice call, the distant party's
voice is hard to listen to or too loud.
・
モバイル
・
・
Check if Sleep is set in short time period.
P.157
Check if the brightness of screen is
changed.
P.157
→
When "Adaptive brightness" is ON, screen
brightness is changed according to the
ambient brightness.
Check if Low battery mode in Power
management is ON.
→
Check if you cover the Proximity sensor
with a sticker etc.
P.30
→
When the temperature of the terminal
becomes high while using, the display
may become darker. It is not abnormal.
Check if the listening volume is changed.
P.84
→
Set the equalizer to adjust sound quality
during a call.
P.88
→
Enable Speaker voice enhancement, Slow
talk to make the caller's voice clear to
understand.
P.88
→
→
P.157
→
P.160
Appendix/Index
199