Charging with a PC
When using Micro USB Cable 01 (optional) for
charging, do the following procedures.
Opening or closing the microUSB jack/
・
microSD card slot cover (P.25)
Notification LED
USB plug
Open the microUSB jack/microSD
1
card slot cover and insert the
microUSB plug of the microUSB
cable horizontally into the
microUSB jack of the terminal with
the engraved side (
Insert the USB plug of the
2
microUSB cable into a USB port of
a PC.
Notification LED of the terminal turns
・
on (P.45).
3
4
5
microUSB plug
microUSB cable
❖ Note
・
) facing up.
When "Install software" screen appears
・
on the terminal, tap [SKIP].
When a screen for new hardware
・
detection etc. appears on the PC, select
"
(Cancel)".
キャンセル
When the charging is complete,
remove the USB plug of the
microUSB cable from the USB port
of the PC.
Remove the microUSB plug of the
microUSB cable evenly from the
terminal.
Close the microUSB jack/microSD
card slot cover, firmly press it and
make sure that there are no gaps
between the terminal and cover.
Check the connecting direction to connect correctly.
Wrong connection may cause damage.
Before Using the Terminal
38