Table of Contents
Advertisement
Note down the information registered
･
in the docomo nano UIM card on a
separate sheet and keep it for future
reference.
Under no condition will DOCOMO be held liable
for any damaged or lost data saved in the
terminal.
Take an expended docomo nano UIM
･
card to a sales outlet such as docomo
Shop for proper disposal in order to
protect the environment.
Do not carelessly damage, contact, or
･
short-circuit an IC.
Doing so may cause data loss or malfunction.
Do not drop a docomo nano UIM card or
･
subject it to impact.
Doing so may cause malfunction.
Do not bend a docomo nano UIM card
･
or place a heavy object on it.
Doing so may cause malfunction.
Do not insert a docomo nano UIM card
･
into the terminal if a label or seal is
attached to the card.
Doing so may cause malfunction.
Bluetooth
function precautions
®
■
To secure the Bluetooth communication
･
security, the terminal supports the
security function compliant with
Bluetooth standards, but the security
may not be sufficient depending on the
setting. Be aware of security risks when
using Bluetooth.
Please be aware that DOCOMO is not
･
responsible for any data leakage that
might occur when communicating data
via Bluetooth.
Frequency band
･
The frequency band used by the terminals
Bluetooth/wireless LAN function is written as
follows:
2.4 : This radio equipment uses the 2400 MHz
band.
Modulation scheme is the
FH/XX/DS/OF
：
FH-SS, other system, DS-SS,
or OFDM system.
4 : The estimated interference distance is 40
m or less.
8 : The estimated interference distance is 80
m or less.
: The full band between 2400 MHz
and 2483.5 MHz is used and the
band of the mobile identification
device can be avoided.
Available channels vary depending on the
country.
For use in an aircraft, contact the airline
beforehand.
Contents/Precautions
21
Advertisement
Table of Contents
