Rgb-Pc Source Menu Options; Auto Config. Adjustment; Horizontal/Vertical Position Adjustments; Phase/Clock Adjustments - Zenith L17V36DVD Operating Manual And Warranty

RGB-PC Source Menu Options

RGB-PC Source Menu Options
- Be sure to select the RGB-PC source before operation.
Auto Config. Adjustment
Auto Config. Adjustment
- Automatically adjusts picture position and minimizes image shaking.
- If the image is still not correct, your TV is functioning properly but needs further adjustment.
1. Press the menu button and then use
G
2. Press the button and then use
G
3. Press the button to run Auto configure.
• If the position of the image is still not correct, try Auto adjustment again.
4. If picture needs to be adjusted more after Auto adjustment in RGB-PC mode, you can
adjust the
Clock Phase
/
Horizontal / V ertical Position
Horizontal / V ertical Position
1. Press the menu button and then use
2. Press the G button and then use
3. Use the F / G button to make adjustments.
• The adjustment range is 0 ~ 100.
4. Press the exit button to save and return to TV viewing.
Phase / Clock Adjustments
Phase / Clock Adjustments
- If the picture isn't clear after auto adjustment and especially if characters are still jittery, adjust the picture Phase
manually.
1. Press the menu button and then use
G
2. Press the button and then use
4. Use the F / G button to make appropriate adjustments.
• The adjustment range is 0 ~ 100.
Clock
• The Phase adjustment range is 0 ~ 31.
• Based on the input mode, the adjustment ranges for
4. Press the exit button to save and return to TV viewing.
D / E button to select the
D / E button to select
.
Adjustments
Adjustments
button to select the
D / E
button to select
D / E
D / E button to select the
D / E button to select
RGB-PC menu.
Auto configure .
menu.
RGB-PC
.
H-Position V-Position
/
RGB-PC menu.
Clock or Phase .
Clock Phase may change.
/
Operation
RGB-PC
H-Position 50
V-Position 50
Clock 50
Phase 10
Auto configure
DE F G
MENU EXIT
Â
RGB-PC
H-Position 50
V-Position 50
Clock 50
Phase 10
Auto configure
DE F G
MENU EXIT
Â
RGB-PC
H-Position 50
V-Position 50
Clock 50
Phase 10
Auto configure
DE F G
MENU EXIT
Â
27