External Equipment Connections; Antenna Connection - Zenith L17V36DVD Operating Manual And Warranty

External Equipment Connections

External Equipment Connections

Antenna Connection

Antenna Connection
- For optimum picture quality, adjust antenna direction.
Connecting to an Inside Antenna Setup
- Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below.
(Use the correct type of antenna cable for the type of wall antenna jack.)
Apartment Buildings
- If you have a 75Ω round cable, insert the bronze wire and then tighten the connection nut. If you have a 300Ω flat wire, connect
the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.
- If using 75Ω round cable, do not bend the bronze wire. It may cause poor picture quality.
Connecting to an Outside Antenna Setup
- This type of antenna is commonly used in single family dwellings.
Single Family Home
- In poor signal areas, to get better picture quality, install a
signal amplifier to the antenna as shown to the right.
- If signal needs to be split for two TVs, use an antenna
signal splitter for connection.
Wall Connection Jack
VHF Antenna
UHF
Antenna
Turn clockwise to tighten.
75Ω Round Cable
Bronze Wire
300Ω Flat Wire
Antenna
Converter
Turn clockwise to tighten.
75Ω Round Cable
Bronze Wire
300Ω Flat Wire
VHF
Signal
Amplifier
PC INPUT
PC INPUT
Antenna
Converter
PC INPUT
UHF
Installation
ANT IN
Antenna Jack
ANT IN
Antenna Jack
ANT IN
11