Table of Contents
Advertisement
www.ti.com
2 EVM Connectors and Test Points
Table 2-1
shows the default configuration for connectors.
Jumper Name
J1
J2
J3
J4
J5
J6
J7
J8, J9
J10
J11
J13
J14
Table 2-2
describes the test points available on the board for easy access measurement.
Test Point
TP1, TP2, TP3
TP4
TP5
TP6
TP7
TP8
TP9
TP10
TP11
TP12
SLUUCL3 – APRIL 2022
Submit Document Feedback
Table 2-1. Jumper Default Configuration
Description
2
I
C Pullup
VIN and GND connector
VBAT and GND connector
Battery pack connector
TS potentiometer connector
USB2ANY connector
VIO connector to 3p3V
Board connector to other modules
LED jumper
VSYS and GND connector
Charge enable jumper control
Micro USB connector (optional for VIN)
Table 2-2. Test Point Descriptions
Copyright © 2022 Texas Instruments Incorporated
EVM Connectors and Test Points
Description
IC GND test point
IC /CE test point
IC VIN test point
IC VSYS test point
IC SCL test point
IC VBAT test point
IC SDA test point
IC /PG or GPO test point
IC TS/MR test point
IC /INT test point
BQ25181 EVM User's Guide
Setting
NA
NA
NA
NA
Connected
NA
Connected
NA
Connected
NA
Low
NA
5
Advertisement
Table of Contents
