Step 2: Install Memory Modules - Gigabyte GA-8VT880 Ultra User Manual

Step 2: Install memory modules

Before installing the processor and heatsink, adhere to the following warning:
1.When RAM_LED is ON, do not install/remove DIMM from socket.
2.Please note that the DIMM module can only fit in one direction due to the one notches.
Wrong orientation will cause improper installation. Please change the insert orientation.
The motherboard has 4 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket. The DIMM module can only fit in one direction due to the notch. Memory size can vary
between sockets.
GA-8VT880 Series Motherboard
DDR
1. The DIMM slot has a notch, so the DIMM
memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into
the DIMM slot. Then push it down.
3. Close the plastic clip at both edges of the DIMM
slots to lock the DIMM module.
Reverse the installation steps when you wish
to remove the DIMM module.
- 14 -
Notch