F_Panel (Front Panel Jumper) - Gigabyte GA-8IPE1000 User Manual

10) F_PANEL (Front Panel Jumper)

Please connect the power LED, PC peaker, reset switch and power switch etc. of your chassis front
panel to the F_PANEL connector according to the pin assignment below.
MSG (Message LED/Power/Sleep LED)
(Yellow)
PW (Power Switch)
(Red)
SPEAK (Speaker Connector)
(Amber)
HD (IDE Hard Disk Active LED)
(Blue)
RES (Reset Switch)
(Green)
NC (Purple)
Message LED/
Power
Power/
Switch
Sleep LED
2
1
Reset Switch
IDE Hard Disk Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal Operation
Close: Power On/Off
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal Operation
Close: Reset Hardware System
NC
- 23 -
Speaker Connector
20
19
Hardware Installation