F_Panel (Front Panel Jumper) - Gigabyte GA-K8NS User Manual

10) F_PANEL (Front Panel Jumper)

Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front
panel to the F_PANEL connector according to the pin assignment below.
HD (IDE Hard Disk Active LED)
(Blue)
SPEAK (Speaker Connector)
(Amber)
RES (Reset Switch)
(Green)
PW (Power Switch)
(Red)
MSG (Message LED/Power/Sleep LED)
(Yellow)
NC (Purple)
GA-K8NS(rev. 2.0) Motherboard
Message LED/
Power/
Sleep LED
2
1
IDE Hard Disk
Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: Power(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
- 22 -
Power
Switch
Speaker Connector
20
19
Reset Switch