Table of Contents
Advertisement
PCI/AGP Divider
You can choose Disabled,PLL/40,PLL/32,PLL/24,PLL/20/PLL/16 mode to adjust PCI/AGP
frequency.
Host/DRAM Clock Ratio
(Warning: wrong frequency may make system can't boot, clear CMOS to overcome wrong fre
quency issue)
2.0
Memory Frequency = Host clock X 2.0.
2.66
Memory Frequency = Host clock X 2.66.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency(Mhz)
The values depend on CPU Host Frequency(Mhz) .
PCI/AGP Frequency(Mhz)
Setup PCI/AGP frequency by adjusting CPU Host Frequency or PCI/AGP Divider item.
DIMM OverVoltage Control
Normal
Set DIMM OverVoltage Control to Normal. (Default value)
+0.1V
Set DIMM OverVoltage Control to +0.1V.
+0.2V
Set DIMM OverVoltage Control to +0.2V.
+0.3V
Set DIMM OverVoltage Control to +0.3V.
AGP OverVoltage Control
Normal
Set AGP OverVoltage Control to Normal. (Default value)
+0.1V
Set AGP OverVoltage Control to +0.1V.
+0.2V
Set AGP OverVoltage Control to +0.2V.
+0.3V
Set AGP OverVoltage Control to +0.3V.
4 3
BIOS Setup
Advertisement
Table of Contents
