Table of Contents
Advertisement
7ZMMHC Motherboard
A.5 Notices:
1.
In order for STR to function properly, several hardware and software requirements must
be satisfied:
A.
Your ATX power supply must comply with the ATX 2.01 specification (provide more
than 720 mA 5V Stand-By current).
B.
Your SDRAM must be PC-100/PC-133 compliant.
2.
Jumper JP8 is provided to connect to the STR LED in your system chassis. [Your chassis
may not provide this feature.] The STR LED will be illuminated when your system is in
STR sleep mode.
Please note:
Do not remove memory modules while DIMM LED is on. It might cause short or
other unexpected damages due to the 3.3V stand by voltage. Remove memory
modules only when STR function is disabled by jumper and AC Power cord is
disconnected.
STR LED Connector External.
1
+
DIMM LED
35
Advertisement
Chapters
Table of Contents
