Gigabyte GA-7ZMMHC User Manual page 32

JP3: Clear CMOS Function
Please note:
You may clear the CMOS data to its default values by this jumper.
JP4: USB Device Wake up Selection
Please note:
(If you want to use "USB Dev Wakeup from S3~S5" function, you have to set the
BIOS setting "USB Dev Wakeup from S3~S5" enabled, and the jumper "JP4"
enabled).
*(Power on the computer and as soon as memory counting starts, press <Del>.
You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP",
then select "USB Dev Wakeup from S3~S5: Enabled". Remember to save
the setting by pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
Panel and Jumper Definition
1
1
Clear CMOS
Normal
(Default)
Pin No. Definition
1-2 close Normal (Default)
2-3 close Clear CMOS
1
1
Normal Enable
(Default)
Pin No. Definition
1-2 close Normal (Default)
2-3 close USB Device Wake up
24