JP4: USB Device Wake up Selection
JP7: STR Function Enable
Panel and Jumper Definition
1
Pin No.
1-2 close Normal (Default)
2-3 close USB Device Wake up
(If you want to use " USB Dev Wakeup from S3~S5 "
function, you have to set the BIOS setting "USB Dev
Wakeup from S3~S5" enabled, and the jumper " JP4 "
enabled)
*(Power on the computer and as soon as memory
counting starts, press <Del>. You will enter BIOS Setup.
Select the item " POWER MANAGEMENT SETUP ",
then select " USB Dev Wakeup from S3~S5 ".
Remember to save the setting by pressing "ESC" and
choose the "SAVE & EXIT SETUP" option.)
1
Pin No.
Definition
1-2 close
STR Enable
2-3 close Normal (Default)
20
Definition