Gigabyte GA-7VKMP User Manual page 24

7) F_PANEL (2x10 pins connector)
GN (Green Switch)
GD (Green LED)
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RST (Reset Switch)
PW (Soft Power Connector)
MPD (Message LED/Power/
Sleep LED)
N C
Please connect the power LED, PC speaker, reset switch and power switch etc. of your
chassis front panel to the F_PANEL connector according to the pin assignment above.
8) PWR_LED
1
MPD+
MPD-
GA-7VKMP Series Motherboard
2
1
Open: Normal Operation
Close: Entering Green Mode
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
N C
MPD-
- 20 -
20
19
PWR_LED is connect with the system power
indicator to indicate whether the system is
on/off. It will blink when the system enters
suspend mode.
If you use dual color LED, Power LED will
turn to another color.