Gigabyte GA-6VXC7-4X User Manual page 15

For Auto Jumper Setting:
Note:
1. If you use 66/100/133 MHz CPU, We recommend you to setup your system speed to
"Auto" value.
2. We don't recommend you to set up your system speed to 75 , 83 , 112 , 124 , 140 ,150
MHz because these frequencies are not the standard specifications for CPU, Chipset
and most of the
75 ,83 ,112 ,124 ,140 ,150 MHz properly will depend on your hardware configurations:
CPU, SDRAM, Cards, etc.
TM
1. Celeron 300A/ 66 MHz FSB
ON
SW2
SW2
peripherals. Whether your
8
CPU Speed Setup
ON
SW1
system can run
ON
SW1
under