Gigabyte GA-6VTX User Manual page 61

Primary Master / Slave, Secondary Master / Slave
The category identifies the type of hard disk from drive C to F that has been installed in the
computer. There are two settings: Auto, and Manual. Manual: HDD type is user-definable;
Auto will automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will
not work properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter
the information directly from the keyboard and press <Enter>. Such information should be
provided in the documentation form your hard disk vendor or the system manufacturer.
CYLS. Number of cylinders.
HEADS number of heads.
PRECOMP write precomp.
LANDZONE Landing zone.
SECTORS number of sectors.
If a hard disk has not been installed select NONE and press <Enter>.
Floppy Drive A / Floppy Drive B
The category identifies the type of floppy disk drive A or drive B that has been installed in the
computer.
None No floppy drive installed.
360K, 5.25 in. 5.25 inch PC-type standard drive; 360K byte capacity.
1.2M, 5.25 in. 5.25 inch AT-type high-density drive; 1.2M byte capacity (3.5 inch
when 3 Mode is Enabled).
720K, 3.5 in. 3.5 inch double-sided drive; 720K byte capacity.
1.44M, 3.5 in. 3.5 inch double-sided drive; 1.44M byte capacity.
2.88M, 3.5 in. 3.5 inch double-sided drive; 2.88M byte capacity.
54
BIOS Setup