Table of Contents
Advertisement
S_LED/LED2: STR LED Connector & DIMM LED
Please note:
Do not remove memory modules while DIMM LED is on. It might cause short or
other unexpected damages due to the 3.3V stand by voltage. Remove memory
modules only when STR function is disabled by jumper and AC Power cord is
disconnected.
IR: IR Header
Please note:
Be careful with the polarity of the IR connector while you connect the IR. Please
contact you nearest dealer for optional IR device.
DIMM LED
+
1
STR LED Connector External
1
Pin No.
Definition
1
VCC (+5V)
2
NC
3
IR Data Input
4
GND
5
IR Data Output
22
Connectors
Advertisement
Table of Contents
