Gigabyte GA-6VTX User Manual page 33

RUSB_ON: Front/Rear USB Device Wake up Selection
Please note: To use "USB Wakeup from S3-S5" function, set BIOS setting
"USB Wakeup from S3-S5" to ENABLED and enable jumpers RUSB_ON &
STR_EN.
*(Power on the computer and as soon as memory counting starts, press <Del>.
You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP",
then select "USB Wakeup from S3-S5". Remember to save the setting by
pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
CLR_CMOS: Clear CMOS Function (Optional)
Please note:
You may clear the CMOS data to it's default values by this jumper.
Panel and Jumper Definition
1
Rear USB
Normal
Front USB
(Default)
Pin No.
1-2 close Normal (Default)
Enable Front/Rear USB
2-3 close
Device Wake up
1 1
Normal
Clear CMOS
(Default)
Pin No. Definition
1-2 close Normal (Default)
2-3 close Clear CMOS
26
1
Enable
Definition