Set Supervisor / User Password - Gigabyte GA-6VMML User Manual

6VMML Motherboard

Set Supervisor / User Password

When you select this function, the following message will appear at the center of the screen to
assist you in creating a password.
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e
( C ) 1999 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD FAIL-SAFE DEFAULTS
LOAD OPTIMIZED DEFAULTS
ESC : Quit
F6 : Load Fail-Safe Defaults
Type the password, up to six characters, and press <Enter>. The password typed now will clear
the previously entered password from CMOS memory. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also press <Esc> to abort the
selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A message
"PASSWORD DISABLED" will appear to confirm the password being disabled. Once the
password is disabled, the system will boot and you can enter Setup freely.
If you select "Always" at "Password Check" Option in BIOS Features Setup Menu, you will be
prompted for the password every time the system is rebooted or any time you try to enter Setup
Menu. If you select "Setup" at "Password Check" Option in BIOS Features Setup Menu, you will
be prompted only when you try to enter Setup.
INTEGRATED PERIPHERALS
HARDWARE MONITOR & MISC SETUP
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
Enter new supervisor password:
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item (Shift) F2 : Change Color
F7: Load Optimized Defaults
Chang /Set /Disabled Password
Figure 11: Password Setting
73
F5 : Old Values
F10: Save & Exit