Gigabyte GA-6IEM User Manual page 26

GA-6IEM Series Motherboard
G) F_PANEL (2x7 pins jumper)
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RE (Reset Switch)
P+P-P-(Power LED)
PW (Soft Power Connector)
? Please connect t h e power LED, PC speaker, reset switch and power switch etc of your chassis front
panel to the F_Panel connector according to the pin assignment above.
F) Battery
+
1
1
1
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 3: LED cathode(-)
Open: Normal Operation
Close: Power On/Off
CAUTION
? Danger of explosion if battery is incorrectly
replaced.
? Replace only with the same or equivalent
type recommended by the manufacturer.
? Dispose of used batteries according to the
manufacturer's instructions.
22