K) JP13 (IR/CIR )
1
L) J16 (Smart Card Reader Header)
1
M) JP22 (CASE OPEN)
1
CASE OPEN
Hardw are Installation Process
? Make sure the pin 1 on the IR device is
aling with pin one the connector. To
enable the IR/CIR function on the board,
you are required to purchase an option IR/
CIR module. For detail information please
contact your autherized Giga-Byte
distributor.
To use IR function only, please connect IR
module to Pin1 to Pin5.
? This MB supports smart card reader. T o enable
smart card reader function an optional smart
card reader box is required. Please contact
your autherized distributor.
? This 2 pin connector allows your system to
enable or disable the system alarm if the sys
tem case begin remove.
21