Table of Contents
Advertisement
PME Event Wake Up
When set at Enabled, any PCI-PM event can awake the system from a PCI-PM controlled stated.
This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Disabled
Enabled
ModemRingOn/WakeOnLan
An incoming call via modem or an input signal comes from the other client server on the LAN can
awake the system from any suspend state.
Disabled
Enabled
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled
Enabled
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
Time (hh: mm: ss) Alarm :
KB Power ON Password
Enter
PnP/PCI Configurations
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PCI 1 IRQ Assignment
PCI 2 IRQ Assignment
PCI 3 IRQ Assignment
: Move
Enter: Select
F5: Previous Values
PCI 1 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
PCI 2 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
PCI 3 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
Disable this function.
Enable PME as wake up event. (Default value)
Disable Modem Ring on function.
Enable Modem Ring on function. (Default value)
Disable this function. (Default Value)
Enable alarm function to POWER ON system.
Everyday, 1~31
(0~23) : (0~59) : (0~59)
Input password (from 1 to 5 characters) and press Enter to set the keyboard
power on password.
PnP/PCI Configurations
[Auto]
[Auto]
[Auto]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Auto assign IRQ to PCI 1. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.
Auto assign IRQ to PCI 2. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
Auto assign IRQ to PCI 3. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.
- 27 -
Menu Level
Device(s) using this
INT:
Display Cntrlr
-Bus 1 Dev 0 Func 0
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup
Advertisement
Table of Contents
