Gigabyte 7VM400M-RZ User Manual page 14

4) FDD (Floppy Connector)
Please connect the floppy drive ribbon cables to FDD. It supports 360K, 1.2M, 720K, 1.44M and
2.88M bytes floppy disk types.
The red stripe of the ribbon cable must be the same side with the Pin1.
5) IDE1 / IDE2 (IDE1 / IDE2 Connector)
Please connect first hard disk to IDE1 and connect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the same side with the Pin1.
6) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode.
7VM400M-RZ Motherboard
34 33
2 1
40 39
2 1
IDE1 IDE2
Pin No.
1
1
2
3
- 14 -
Definition
MPD+
MPD-
MPD-