Power Management Setup - Gigabyte 7VM400M-RZ User Manual

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
ACPI Suspend Type
x USB Device Wake-Up from S3
Power LED in S1 state
Soft-Off by PWRBTN
AC BACK Function
Keyboard Power On
Mouse Power On
PME Event Wake Up
ModemRingOn/WakeOnLan
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
S3(STR)
USB Device Wake-Up From S3
This function will available when "ACPI Suspend Type" set at "S3/STR".
Disabled
Enabled
Power LED in S1 state
Blinking
Dual/Off
Soft-off by PWR-BTTN
Instant-off
Delay 4 Sec.
AC BACK Function
Soft-Off
Full-On
Memory
Keyboard Power On
Disabled
Password
Keyboard 98
Mouse Power On
Disabled
Enabled
7VM400M-RZ Motherboard
Power Management Setup
[S1(POS)]
Disabled
[Blinking]
[Instant-Off]
[Soft-Off]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Set ACPI suspend type to S1. (Default value)
Set ACPI suspend type to S3.
USB device can't wake up system from S3.
USB device can wake up system from S3. (Default value)
In standby mode(S1), power LED will blink. (Default value)
In standby mode(S1):
a. If you use single color LED, power LED will ture off.
b. If you use dual color LED, power LED will ture to another color.
Press power button then Power off instantly. (Default value)
Press power button 4 sec to Power off. Enter suspend if button is pressed
less than 4 sec.
Always in Off state when AC back to the system. (Default value)
Always power on the system when AC back.
System power on depends on the status before AC lost.
Disable this function. (Default value)
Enter from 1 to 5 characters to set the keyboard power on password.
If your keyboard has a "POWER Key" button, you can press the key to
power on your system.
Disabled this function. (Default value)
Power on system by mouse event.
- 26 -
Menu Level
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help