Table of Contents
Advertisement
1. Press to release the dummy card from the New Card slot.
2. Hold the PCI Express card with its orientation symbol pointing
into the slot and the topside of the card facing up.
3. Slide the card into the slot until it clicks into the connector.
4. If you encounter too much resistance, do not force the card.
Check the card orientation and try again.
4.1.3
Removing a PCI Express Card
20
20
1. Push the card all the way to in to release it.
2. Pull the card out of the slot.
4.2 Adding and Removing SD/MMC/MS Cards
Before removing an SD/MMC/MS card, stop it running
from the configuration utility on the taskbar. Failure to do
so could result in data loss.
Insert the SD�MMC�MS card into the card reader slot.
To remove the SD�MMC�MS card, push it in gently, it ejects
automatically.
Advertisement
Table of Contents
